RUGGED
TRUE ON-LINE UPS
rACK MOUNT UPS
GALAXY SERIES
Partial Model Selection
120 VAC OUTPUT MODELS
THREE-PHASE INPUT MODELS
GRSLPFC11-5K60
-120/208-120-5M-5U |
5 |
4 |
120/208VAC three-phase |
15A |
110 |
5 min @ 3 kw |
5U |
 |
GRSLPFC11-3K60-120/208-120-5M-4U
|
3 |
3 |
|
11A |
95 |
5 min |
4U |
|
GRSLPFC11-3K60-120/208 -120-10M-4U |
3 |
2.4 |
|
9A |
95 |
7 min |
4U |
|
GRSLPFC11-3K60-120/208 -120-5M-3U |
3 |
2.4 |
120/208VAC three-phase |
9A |
80 |
5 min |
3U |
|
GRSLPFC11-2K60-120/208 -120-5M-3U |
2 |
1.6 |
120/208VAC three-phase |
6A |
80 |
7 min |
3U |
|
GRSLPFC11-1.5K60-120/208 -120-5M-2U |
1.5 |
1.2 |
120/208VAC three-phase |
5A |
60 |
5 min |
2U |
|
| GRSLPFC11-1.5K60-120/208 -120-5M-2U-LIFE |
1.5 |
1.2 |
120/208VAC three-phase |
5A |
37 |
10 min |
2U |
|
Note: Three-phase input models do not have PFC input
OPTIONS
• Ruggedization against high shock, vibration and humidity
• MS connector mates and multiple output outlets
• Chassis Slide Guides
• Electromechanical transfer switch.
• Additional battery back-up time
• Custom Enclosures
• Additional run time via external batteries
• 3Ø Power Input
• Premium VRLA batteries with up to 10 year life
• 400 Hz input and / or output
• “LIFE” models feature internal Lithium Iron Phosphate batteries for substantial weight
savings and longer runtime, including embedded Battery Management System
• CAD Free Connectors
• Non-PVC wiring
• 28 VDC Input
• High IP Protection for front / rear panels
• AUX DC Outputs |
|
SPECIFICATIONS
ELECTRICAL
Input Voltage: 120/240 VAC Autoselect PFC (3Ø
input optional)
Output Voltage: 120, 208, or 230 VAC (specify)
Frequency: 50 / 60 / 400 Hz. Available
Voltage Regulation: ± 2% NL to FL
Frequency Regulation: ± 0.5% NL to FL
Harmonic Distortion: 5% THD, 3% typical
Input Power Factor: 0.95 or Better @ half-full load
Efficiency at full load: 80-85% @ full load typical (batteries charged)
Connections: MS Connector (mates opt.)
NOMINAL DIMENSIONS:
UPS Dimensions:
19" Wide x 24" Deep (See chart for height)
External Battery Dimensions (5KVA EXT Models):
5.25 high x 19” wide x 24” deep
Note: External batteries available on all models if increased run time is required – up to 24 hours.
INTERNAL BATTERIES
Internal on all but 5KVA EXT models
• Standard sealed, maintenance free lead acid batteries have -20 to +50C operating range and useful life of 8-10 years @ +25C ambient.
• Optional Premium sealed, maintenance free lead acid batteries have -40 to +80C operating range and useful life of 8-12 years @ +25C ambient.
• Optional Lithium Iron Phosphate batteries (as shown in units with “LiFe” model suffix) have -20 to +50C operating range and useful life of 8-10 years @ +25C ambient, but are much lighter than lead acid batteries and offer about twice the battery run time.
PROTECTIVE FEATURES
AC & DC Input Circuit Breakers, Low Battery
Shut Off, Overload & Thermal Protected, Input
Under/Overvoltage Protected, Audible Alarm with
Silence Switch.
ENVIRONMENTAL
UPS Operating Temp.: -20° to +55°C (Extended ranges optional)
UPS Storage temperature range: -20° to +50°C (Extended ranges optional)
Humidity: to 95% RH non-condensing – Designed to meet MIL-STD-810 optionally. All boards conformal coated with Acrylic MIL-I-46058 Type R.
Elevation: 15,000 Ft. (4,572m) operating;
40,000 ft. (12,192m) non-operating
Shock: 20g, 11 mS half sinewave – Designed to meet MIL-STD-810
Audible Noise: Less than 55 dbA at 5 ft.
Battery Storage Temperature Range:
-20° to +50°C (Standard)
-40° to +80° C (Optional) Using premium VRLA batteries.
Note: Run time shown using standard batteries. Consult Factory for run times using premium batteries. For best results, batteries must be kept at 25 degrees Celsius ambient temperature. Extreme low temperatures will result in reduced run time, while extreme high temperatures result in significantly reduced battery lifespan. Click here for more information on THE EFFECTS OF EXTREME TEMPERATURES ON BATTERIES.
MTBF: 100,000+ hours per field data @ +25C Ambient Ground-Fixed
MTTR: 30 minutes by qualified personnel
STD. REMOTE CONTACTS/COMMUNICATIONS
SNMP V1.0 standard via CAT-5 Connector
Major Alarm: Logic Fault, Low Battery, OT, UPS
Overloaded.
Minor Alarm: Utility Off
RS 232 (Available-Optional) Via DB 9 Connector
Alarm Contacts(Available-Optional)
INDICATORS
Status (Red / Green)
UPS Off (Red)
Logic Fault (Red)
Low Battery (Red)
Over Temperature (Red)
Load on Utility (Red) Optional with transfer switch
AUDIBLE
Audible alarm with silence switch
|
SYSTEM COMPLIANCE
MIL-STD-1399 Section 300B: For Type I apparatus
MIL-STD-740-1: The rugged Ultra Lightweight Galaxy-Series UPS System was tested and qualified to MIL-STD-740-1 Airborne Sound Measurements for Shipboard Equipment
Additional Ruggedization to meet MIL-STD-901, MIL-STD-167, MIL-STD-810, and DOD-STD-1399: The UPS System’s construction is extremely robust, and ruggedized throughout. All components and modules within the unit are mounted using additional steel brackets and heavy-duty stainless-steel hardware, which is then further secured using Loctite and RTV where required. All boards are conformal-coated (Acrylic MIL-I-46058 Type R) for maximum resistance to potential condensation and fungus growth. The unit was tested and qualified as follows:
MIL-STD-901D for Grade A, Class III, Type B Equipment
MIL-STD-167-1 for Type I Equipment
MIL-STD-810F:
* Air Temperature per MIL-STD-810F Method 502.4, Procedure II
* Operational Humidity per MIL-STD-810F Method 507.4.
* Salt Fog Atmosphere per MIL-STD-810F Method 509.4
* Steady State Temperature per MIL-STD-810F, Method 502.4, Procedure I, low temperature storage @ 40°C.
* Temperature Shock per MIL-STD-810F, Method 503.4, Procedure II, Cyclic.
* Storage and Transportation Humidity per MIL-STD-810F, Method 507.4, subject the UUT to 95% relative humidity at 30°C.
* Altitude per MIL-STD-810F, Method 500.4, Procedure I, Storage/Air Transport.
* Transit Shock per MIL-STD-810F, Method 516, Procedures VI, V and VI,
* Transportation Vibration per MIL-STD-810F, Method 514, Procedure II for loose cargo transportation
DOD-STD-1399 Section 301A Table V – Design Limits for Ship Motion
Internal EMI Reduction Package to meet MIL-STD-461: The design of this unit is specifically focused on reducing EMI emissions. The UPS contains substantial internal filtering to minimize EMI emissions. Inputs which may be susceptible to transients are protected by several methods. The compact rack mount chassis is specifically treated with low surface resistivity finishes on the interior. All aluminum parts are treated with clear irridite. The steel parts are treated with zinc plate, followed by a clear chromate. Paint method via ANSI-61 gray is designed to assure excellent bonding of mating sheet metal parts. All input and output ventilation filters include metal honeycomb-style or mesh filters. The unit was tested and qualified as follows:
MIL-STD-461E: CE101, CE102, CS101, CS114, CS116, RE102, RS101, and RS103
Note: Qualification testing was performed with optional premium batteries required to meet temperature testing requirements.
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}