| 
• Solid-State Design
• Advanced Modular Capabilities
• Pure Sinewave Output
• Lightweight, extremely compact enclosures
• High reliability
• OV, O.L. and O.T. protected
• MTTR below 30 minutes; modular design
• Withstands high reactive load
• Tight voltage and frequency regulation
• Boards are conformal coated
•
Power Factor correction available on selected
GLFC-Series models.
•
Ruggedization to meet MIL-STD-810 shock,
vibration and humidity
•
Wide temperature range -40°C to +71°C
•
Special output voltages and frequencies
•
MS Connectors or outlets
•
Custom painting and marking
•
Heavy-Duty Handles
•
High inrush for motor start
•
Wall Mount Plate
•
Custom NEMA Wall-Mount or Floor-Mount Enclosures
•
Frequency Meters
•
Elapsed Time Meter
•
Alarm Contact Closures
•
Remote Start / Stop Control
•
Output Circuit Breaker
•
Crystal Frequency Control
•
Contacts for Remote Operation
•
Dual Output
•
Safety Door Locks (Cabinet Models)
•
+/- 10% Output Voltage Adjustment (located on
front door of Cabinet Models)
•
Heavy Duty Casters (Cabinet Models)
* Some options listed above may not fit or may
already be standard equipment on some Nova Frequency
Converters. Please consult the factory for details.
|
|
Power Ratings: 120 VA - 30+ KVA
Input Voltage: Most standard AC
voltages including 115, 120, 200, 208, 220, 240,
277, 380, and 480 available in single and three-phase
configurations. Power Factor correction available
on selected GLFC-Series models.
Output Voltage: Most standard AC
voltages including 115, 120, 200, 208, 220, 240,
277, 380, and 480 available in single and three-phase
configurations.
|Frequency: 50 Hz, 60 Hz, or 400
Hz (+/-0.5%)
Frequency Regulation: +/-0.5% N.L.
to F.L. (Crystal available)
Frequency Transients: None
Voltage Regulation: +/-1.5% N.L. to F.L.
Efficiency: Approximately 85-95%
(depending on model)
Total Harmonic Distortion: 3% Typical,
5% Max
Overload: 120% Typical Power Factor:
0.7 Lead to 0.7 Lag
Input Circuit Protection: Circuit
Breaker / Fuses, Transient Suppressors Output
Circuit Protection: Current Limit, Short
Circuit Protection, Thermal Protection, and Semi-Conductor
Protection
Operating Temp:
-20°C to +50°C Standard
-40°C to +71°C Optional
Cooling: Forced Air by
internal DC brushless fan
Vibration: Normal shipping and
handling
Shock: 20g, 11 mS half sinewave
– Designed to meet MIL-STD-810 optionally
Elevation: 10,000 ft. typical
Humidity: to 95% RH non-condensing
– Designed to meet MIL-STD-810. All boards
conformal coated with Acrylic MIL-I-46058 Type
R.
Audible Noise: 65 dBA at 5 ft.
typical
EMI: Designed to meet FCC Part
15, Class A. Designed to meet MIL-STD-461 with
optional additional filtering.
MTBF:30,000+ hours typical per
MIL-MDBK-217
MTTR: Less than 30 minutes.
|
