| 
• Pure Sinewave
Output
• Compact Size
• Light Weight design
• Extremely Rugged Construction
• High reliability: MTBF exceeds 100,000
hours
• OV, O.L. and O.T. protected
• MTTR below 30 minutes
• Withstands highly reactive load
• Tight voltage and frequency regulation
• Conformal coated boards
•
Ruggedized to meet MIL-STD-810 shock,
vibration and humidity
• Wide
temperature range
• Special
output voltages and frequencies
• Provision
for 3 Phase connection
with 2 more identical units
• 19"
Panel mount
• MS
Connectors or outlets
• Custom
painting and marking
• Handles
• High
inrush for motor start
• Transfer
switch to alternate AC source
• Wall
mount plate
• Rail output voltages & frequencies (91.66, 100, 250 Hz)
• Customized VDC input ranges |
|
Electrical
Input Voltage: See chart above
Output Voltage: See chart above
Frequency: 50 Hz, 60 Hz, 400 Hz (+/-0.5%)
Frequency Regulation: +/-0.5% N.L. to F.L.
Voltage Regulation: +/-1.5% N.L. to F.L.
Efficiency: Approximately 80% (depending on
model)
Reactive Load: 0.75 Lead to 0.75 Lag
Distortion: 5% THD, 3% Single Harmonic
Overload: 125% for 5 minutes
Overload Protection Range: Automatic
overload & short circuit protection
Isolation: 1500 Volt
Transient Response: Approx. 3
cycle recovery to 95% of nominal
Operating Temp: -20°C to
+50°C Std
-30°C to +60°C Optional
Storage Temp: -40°C to
+71°C
Cooling: By internal DC
brushless fan
Vibration: Normal shipping and
handling
Shock: 20g, 11 mS half sinewave
Humidity: To 95% RH non-condensing
EMI: Designed to meet FCC Part
15, Class A; can meet MIL-STD-461 with optional
filtering
|
