int_nav.gif

 
 
 
 
 
 

Other Products


Charts/Graphs

SPECS/STD FEATURES
AVAILABLE OPTIONS

 

  GALAXY MIL INVERTERS
 
Input: 20-32VDC (MIL-STD-1275 Optional)
Output: 120V or 220V 50, 60Hz or 400Hz Power: 600W-5KVA


The Galaxy-MIL Series Inverters are extremely rugged by design, and built to withstand the rigors of harsh Environment military applications where MIL-STD-461 and MIL-STD-810 apply. MIL-STD-1275 is optional as well. The units are ultra reliable and used worldwide on a variety of high profile mission critical applications where light weight, high MTBF, and low MTTR are called for. They can be easily
customized with a variety of options to fit almost any application from vehicular to aircraft.

 

Click to Enlarge
Rugged transit cases are optional

 

Click to Enlarge
GL5K60-24-120-MIL


Click to Enlarge
GL2.5K60-24-120-MIL


Click to Enlarge
GL1K60-24-120-MIL


Click to Enlarge
NGL600W-24-120-MIL

Click here for specs (PDF)

 


Partial Model Selection (120VAC, 60 Hz Models shown)


60HZ MODELS

OUTLINE
DRAWING
MODEL KVA/KW SIZE
(H x W x D)
(INCHES)
WEIGHT (LBS)
NGL600W-24-120-MIL 600W 3 x 9.5 x 13.25 7
  GL1K60-24-120-MIL 1 / 0.8 6.5 x 11 x 19.5 15
GL2.5K60-24-120-MIL 2.5 / 2 5.5 x 12 x 17 35
GL5K60-24-120-MIL 5 / 4 5.25 x 19 x 22 65

BACK TO TOP




• Pure Sinewave Output
• Small Size & Light Weight for Portability
• High reliability
• OV, O.L. and O.T. protected
• MTTR below 30 minutes; modular design
• Withstands high reactive load
• Tight voltage and frequency regulation
• Output fault alarm (relay closure)
• All boards conformal coated with Acrylic MIL-I-46058 Type R.




Special output voltages and frequencies
Provision for 3 Phase connection with 2 more identical units
19" Panel mount or wall mount plates
Alternative connectors
Custom painting and marking
Transfer switch to alternate AC source
Non-PVC wiring
RS232 or SNMP Communication

 



Electrical
Input Voltage:
20-32 VDC
(MIL-STD-1275 Optional)
Output Voltage:
120VAC (220VAC optional)
Frequency:
Choose 50 Hz, 60 Hz, or 400 Hz (+/-0.5%)
Frequency Regulation:
+/-0.5% N.L. to F.L.
Voltage Regulation:
+/-1.5% N.L. to F.L.
Efficiency:
Approximately 85-86% (depending on model)
Reactive Load:
0.75 Lead to 0.75 Lag
Distortion:
5% THD, 3% Single Harmonic
Overload:
125% for 5 minutes

Overload Protection Range: Automatic overload & short circuit protection
Sync & Phase Lock Range: +/-3 Hz, Typical (50/60 Hz models)
Transient Response: Approx. 1/4 cycle recovery to 95% of nominal


TYPICAL
Operating Temp: -32°C to +50°C per MIL-STD-810 (extended range available)
Storage Temp: -40°C to +80°C per MIL-STD-810
Rain & Dripping Water:  to MIL-STD-810F Method 506.4
Vibration: per MIL-STD-810F Method 514.5 on iso-mount
Shock: per MIL-STD-810F Method 516.5 on iso-mount
Humidity: To 95% RH non-condensing per MIL-STD-810F Method 507.4
Fungus: to MIL-STD-810F Method 508.5
Salt / Fog: per MIL-STD-810 Method 509.4
Sand / Dust: per MIL-STD-810 Method 510.4
Altitude: to 15,000 feet per MIL-STD-810F Method 500.4
EMI: MIL-STD-461E CE102, RE102, RS103, CS101, CS114, CS115, and CS116 optional external filters are available to comply with additional parameters as required.
Finish: CARC paint IAW MIL-DTL-53039B (Green 383)

 

Note: Enviromental and mechanical specifications shown are as typically equipped. Please verify your requirements before ordering a model to ensure compatibility.

DC-AC INVERTER FAQ

Please click here to request more information on this product.


 
 
Untitled Document