| 
• Sinewave
Output
• Small Size
• Lightweight, extremely compact
• High reliability, MTBF exceeds 100,000
hours
• OV, O.L. and O.T. protected
• MTTR below 30 minutes; modular design
• Withstands high reactive load
• Tight voltage and frequency regulation
• Output fault alarm (relay closure)
• Boards are conformal coated
•
Ruggedized to meet MIL-STD-810 shock,
vibration and humidity ("R" option)
• Wide
temperature range -40°C to +60°C
• Special
output voltages and frequencies
• Provision
for 3 Phase connection
with 2 more identical units
• 19"
Panel mount ("P1" option)
• MS
Connectors or outlets
• Custom
painting and marking
• Handles
• High
inrush for motor start
• Transfer
switch to alternate AC source
• Wall
mount plate ("W" option)
• Chassis
slides (rack mount models only)
• Switchable
50/60 Hz output
|
|
Electrical
Input Voltage: 11-16
VDC (Extended range available)
Output Voltage: See Table Below
Frequency: 50 Hz, 60 Hz, 400 Hz (+/-0.5%)
Frequency Regulation: +/-0.5% N.L. to F.L.
Voltage Regulation: +/-1.5% N.L. to F.L.
Efficiency: Approximately 70% (depending on
model)
Reactive Load: 0.75 Lead to 0.75 Lag
Distortion: 5% THD, 3% Single Harmonic
Overload: 125% for 5 minutes
Overload Protection Range: Automatic
overload & short circuit protection
Sync & Phase Lock Range:
+/-3 Hz, Typical (50/60 Hz models)
Transient Response: Approx. 1/4
cycle recovery to 95% of nominal
Operating Temp: -20°C to
+50°C Std
-40°C to +60°C Optional
Cooling: By internal DC
brushless fan
Vibration: Normal shipping and
handling
Shock: 20g, 11 mS half sinewave
Humidity: To 95% RH non-condensing
EMI: Designed to meet FCC Part
15, Class A, Can meet MIL-STD-461 with additional
filtering
|
